Top 10 AMPS Phone Holder – Cell Phone Automobile Cradles

As an Amazon Associate I earn from qualifying purchases.

1. Panavise


Panavise PortaGrip Phone Holder with AMPS Adapter Plate , Black

Panavise #ad - Rubberized indexed grippers and foam backed cradle won’t scratch your device. Low profile design minimizes mount behind phone. Quick release button for easy phone access. Side arms adjust from 2. 25" to 3. 75" in width to fit nearly any phone. Amps compatible. Ratcheted feet allow for access to data ports.
BrandPanavise #ad
ManufacturerPanavise #ad
Height2.25 Inches
Length4.13 Inches
Weight0.25 Pounds
Width3.13 Inches
Part Number15575
WarrantyLifetime warranty

2. iBOLT


Comes with Multiple mounting Options, Motox, Sony's, iBOLT miniPro AMPS Car Mount for iPhone 5/6 / 6s Plus / 7/8 / X,Samsung Galaxy S8 / S7 / Note 4 / Note 5 / Note 8, LG, HTC 's

iBOLT #ad - From 58mm-90mm 2. 2"-3. 5". Functionality: press the spring loaded latch to the right when inserting vertically. Fits all smartphones, from an iPhone 5 up to an iPhone 12 Pro Max with a case. Attach directly to dashboard using our adhesive "miniBall" mount or use the Amps plate for a permanent mounting solution.

Simply use the amps plate mount to drill the mount in the kitchen, on your work bench, in the car, etc. Includes a screw pack and adhesive for the Amps plate mounting solution. Turn cradle and push latch up or down if inserting phone horizontally. The minipro amps is a universal smartphone mount that can be used in the car or at home. Two mounting options: kit includes amps plate drill base and adhesive miniBall mount to mount anywhere on your dashboard.

Works with most Cases too. Compatibility: fits all smartphones incl. Easy 1-hand insertion with an open camera view. Iphone 4 / 7 plus/ 8 / 6+ / 5 / 8 plus/ x / 6 / 7 / 10 and samsung galaxy s10 s9, S8, Note 20, Note 10 Note 5, Note 6, Note 4. Industry standard: amps pattern mount is compatible with vehicle-specific mounts, Pro. Fit, including those offered by ProClip, and others.
BrandiBOLT #ad
ManufactureriBOLT #ad
Height3 Inches
Length4.4 Inches
Width3.5 Inches
Part NumberFBA_IBU-33427



ARKON Heavy Duty 4 Hole AMPS Car or Wall Mounting Pedestal for Dual T Pattern Smartphone and Tablet Holders

ARKON #ad - Low vibration 4 hole ampS mounting pedestal attaches with screws to walls and other solid flat surfaces. Mount is compatible with Arkon Dual T smartphone and tablet holders sold separately.
BrandARKON #ad
ManufacturerArkon #ad
Height3 Inches
Length9 Inches
Weight0.02 Pounds
Width6 Inches
Part NumberRMAMPS2T



VICSEED Car Phone Mount, Thick Case & Big Phones Friendly Long Arm Suction Cup Phone Holder for Car Dashboard Windshield Air Vent Hands Free Clip Cell Phone Holder Compatible with All Mobile Phones

VICSEED #ad - The car phone holder is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. Long arm design & multiple viewing angle: the car mount for iphone 11 has a telescopic arm that extends from 4. 84" - 9. 05" and can pivot up or down for a variety of angles which optimizes viewing capabilities.

The unprecedented design makes leaves zero scratches on mobile devices. Perfect protection: say goodbye to the easy-scratched plastic panel car mount. Note: use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry. It easily sticks securely on the dashboard or most flat surfaces. Vicseed upgrade 3 in 1 mobile phone holder for car adds a high-density silicone material with excellent resilience. 3 in 1 universal car mount: vicseed car cell phone holder made with airliner ptfe material, trucks, taxis; good assistant for Uber, windshield or vent to meet your demand at your convenience and requirements.

Position your phone at the perfect angle to enjoy a more relaxed and safer drive. Remove the car vent phone mount easily by pulling the suction pad without leaving any nasty marks. Good choice to most of the cars, pickup trucks, can be universally mounted to your dashboard, SUV, Lyft drivers. This car holder for cell phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles.
BrandVICSEED #ad
ManufacturerVICSEED #ad
Height1.18 Inches
Length3.94 Inches
Weight0.73 Pounds
Width3.15 Inches
Part NumberSB-304
Warranty30 Days

5. Ampcaddy


Universal Cell Mount Holder for Bike, Boat, Golf Cart and Stroller, iPhone 6s | 6s Plus, Car, S5, 8 | 8 Plus, Galaxy S7, S6, Adjustable, Fits iPhone X, 7 | 7 Plus, Phone Holder with Clamp

Ampcaddy #ad - Adjustable grip and 360 degree rotate and Swivel - adjust and secure your phone to any angle and position that suits your preference and enjoy the comfort of your ride. Extra secure and shock absorbing - rubberized clip with silicone belts grip phone firmly and securely.

It holds tight, make the most extreme or casual ride - the phone will not fall. Adjustable mounting clamp attaches up to 2 inches in diameter. No tools for installation required. Universal phone holder with mount - this universal cell phone mount will securely fit any smart phone up to 3. 75 inches wide! holds iphone 12, iphone x, iphone 12 max Pro, iPhone XR, iPhone 11, iPhone 6 | 6s | 6 Plus.

If you ever have a problem with your Ampcaddy phone mount simply contact us and you will receive a full refund or replacement. Lifetime warranty - 100% money back guarantee. Easy attaching - mounts to any bike, boat, golf cart, motorcycle, car, shopping cart or stroller. Samsung galaxy s10 | galaxy s9, iphone 8 | 8Plus, iPhone 7 | 7 Plus, Galaxy S8.
BrandAmpcaddy #ad
Height1.75 Inches
Length3.95 Inches
Width2.75 Inches

6. Beam Electronics


Beam Electronics Phone Car Air Vent Mount Holder Cradle Compatible for iPhone 12 11 Pro Max XS XS XR X 8+ 7+ SE 6s 6+ 5s 4 Samsung Galaxy S4-S10 LG Nexus Nokia, Car Phone Holder Mount

Beam Electronics #ad - 360 degree rotation: the fully 360-degree rotation provide you with the best viewing angle. The holder ensures safe driving whether you are talking, navigating, listening to music or charging.

Simplistic installation, Single-handed Operation, No Tools Needed. Quick release button: press button on back of unit to slide open and then take out mobile phone. This car phone mount holder is compatible with most all cell phone devices. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power. Broad compatibility: passed a wide range of tests, nokia, 5c, 5s, gps device.

Sturdy, nexus, 6s, htc, lg, samsung galaxy s6, iphone 7 7 Plus iPhone 6s Plus, fit for most cellphones, cradle-less and attractive device holding system. Suitable for width size from 1. 9 inch to 3. 7inch smart phone or electronic devices. Single-handed operation: simple installation and removal of smart phones.
BrandBeam Electronics #ad
ManufacturerBE #ad
Height5.51 Inches
Length2.72 Inches
Weight0 Pounds
Width3.39 Inches
Part NumberBeam Electronics Car Phone Holder Mount
ModelBeam Electronics Car Phone Holder Mount
WarrantyLifetime Warranty



Upgraded Clip Magnetic Phone Car Mount 6 Strong Magnets Cell Phone Holder for Car Case Friendly iPhone Car Holder Compatible with All Smartphones & Tablets, LISEN Car Phone Holder Mount

LISEN #ad - Lock your phone firmly: lisen magnetic phone car mount with 6 built-in strong magnets, the maximum bearing up to weight of 4 cellphones. Then finish the installation. Easy installation: benefit from the special design of the clamp, this iphone car mount is quite easy to install, just need to put it on the car’s outlet blades and adjust the length of clamp by turning the knob to match the outlet.

Note: this phone holder only compatible with horitable air vent and not compatible wiTH VERTICAL OR ROUND AIR VENT. Any device needs to use the metal palte even iphone 12. Universal compatibility: universal air vent car phone holder will firmly hold most smart phones and mini tablets compatible with iphone 12 mini/12/12 pro/12 pro max/11/11 pro/11 pro max/XR/X/8/7/6/5, Note 9/ Galaxy S10/ S10+/ S10E/ S9/ S8 /S7 /S6 /Edge S6 /S5, iPad Air 2/Mini 3/ Pro 9.

7 and more. Note: this product cannot work with MagSafe. Powerful suction keep your cellphone stay stably even when drive on a bumpy road. It is more stable than the round. Please note:1. The cell phone holder for car is borned for innovation & practicabiliTY, it solving the market’s common problem of being easy to fall off over time. It is recommend that use the “square pad” on the back of your phone/case.
BrandLISEN #ad
ManufacturerLISEN #ad
Height2.56 Inches
Length1.93 Inches
Weight0.11 Pounds
Width1.42 Inches
Part NumberLV633-Black
Warrantyone year

8. Loncaster


GPS Devices and More, Samsung, Car Phone Mount Silicone Car Pad Mat for Various Dashboards, Slip Free Desk Phone Stand Compatible with iPhone, Android Smartphones, Black, Loncaster Car Phone Holder

Loncaster #ad - Widely compatibility : the dashboard cell phone holder is suitable for most kinds of cell phones or gps devices which are between 6-12mm thick. Stable & slip free : dependents on its soft silicone-textured bottom and sticky pads, scratching or flying out whenever there is an emergency braking, it can protect phone against bumping, sudden stop and sharp turn.

Use tips : peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean no dust before laying the holder on. Including iphone 11/11 pro/11 pro max/ xr/ xs/ xs max/ x/8/8 plus/7/7 plus/ 6s /6s plus/6/6 plus/5se/5s/5/4s, samsung galaxy note 8 /9/10 /10 pro/20 ultra, ipad, LG, Sony, S 20 plus/ 8 plus / 9 plus /10 plus, Mi, S20/S 8 /9 /10, S 7 Edge, Pixel, Huawei, Nexus, HTC, Garmin and so on.

Washable & reusable : the bottom of the car phone holder is made from high-tech adhesives. Just rinse with water and dry it, it will be the same as the new one.
BrandLoncaster #ad
ManufacturerLoncaster #ad
Height1.8 Inches
Length4.8 Inches
Weight0.37 Pounds
Width4.8 Inches
Part Numberyx-40

9. iOttie


LG, Black, Samsung, Nokia, Smartphones, Huawei, iOttie Easy One Touch 4 Dash & Windshield Universal Car Mount Phone Holder Desk Stand for iPhone, Moto

iOttie #ad - Adjustable viewing: the telescopic arm extends from 4 – 6. 5 inches and pivots on 260 degree arc for a variety of mounting positions. Easy one touch lock/release: The patented Easy One Touch mechanism allows you to quickly mount and remove your phone with one hand.

Strong suction: single use dashboard disc and reusable suction cup combo provide a powerful hold and superior sticking strength. Universal mounting: holds all phone and case combinations from 2. 3 inches to 3. 5 inches in width. Adjustable bottom foot: the foot on the bottom of the mount cradle can be adjusted side to side, up and down, or removed entirely to hold smartphones and cases of all sizes. The rotating ball joint allows you to view your phone in both landscape and portrait mode.
BrandiOttie #ad
ManufactureriOttie #ad
Height9 Inches
Length3 Inches
Weight0.38 Pounds
Width5 Inches
Part Number852306006596
ModelEasy One Touch 4
Warranty2 year manufacturer

10. EdorReco


2 Pack Magnetic Phone Mount for CarUpgrade 8X MagnetsStrong Magnet Cell Phone Holder,Dashboard 360° Rotation & Degrees View, for iPhone SE 12 11 Pro XS Max XR X 8 Plus Samsung Note20 S20 Note10 More

EdorReco #ad - 3m vhb strong adhesivethe phone holder can be firmly fixed to your dashboard. With 8*n52 super magnets. Select reliably&use joyfullythe ball joint supports 360° rotation and perfect angle adjustment with one hand. The longer the time, if you need to move the holder, the stronger the 3M adhesive strength.

3m adhesive is disposable, please use the new 3M adhesive in the package. 12 hours friendly customer service response. Our magnetic car phone holder is elegant and compact, you can share a car mount with a good friend, family member or team. Please press it for 15 seconds and wait 12 hours before using it. This magnetic phone holder will hug your phone tightly even when driving through potholes.

Universal magnetic phone holder for car compatible with iphone 12 pro max/12 pro/12 mini/11 Pro Max/11 Pro/SE/Xs Max/XS/XR, LG, Samsung Galaxy Note 20/S20 Ultra 5G/20+, Sony and all phones. You will get2 packmagnetic car phone holder, 4 *3m adhesive, 2* square metal piece, 4*Protective films, 2* Round metal piece *, 2*Cleaning Kit, 2* User Manual. 2 pack magnetic car mount small size & strong magnetic force.
BrandEdorReco #ad
ManufacturerMFox #ad