As an Amazon Associate I earn from qualifying purchases.
iOttie #ad - This enables a myriad of customized viewing angles while you’re on the road. Telescopic arm: the improved telescopic arm now extends from 5 inches to 8 inches as opposed to the Easy One Touch 4 which only extended to 6.
5inch and pivots 260 degrees. The mount’s arms will close automatically, holding your device securely while you drive. Wide compatibility: new larger Easy One Touch button, with a universal cradle that fits smartphones and cases of any size.
Easy one touch mechanism: press the locking side arms with a quick one-handed motion, and place your phone against the trigger button. Adjustable bottom foot: You can easily and securely adjust the bottom foot by squeezing the spring button. Magnetic cord organizer: Keep charging cables neatly organized with the magnetic tab located near the bottom foot.
CINDRO #ad - Firmly clip: the car phone holder mount has an adjustable handle lock clasp, which can easily and firmly fix the vent mounting clip to the car vent. The quick release button and adjustable clamp arm make it very easy to sheathe and remove your phone just with one hand.
It can hold your phone more tightly than other silicone arm clips, you can rollover your phone at will, it will not move at all. Broad applicability: the ultra-wide adjustable arm design will make the car phone holder suitable for all mobile phones 4.
Secure grip & never fall off: the phone mount for car is armed with an innovative hollow silicone rubber. Easy to install: clamp the car vent phone mount on the vent and rotate the handle lock ring. Whenever and wherever, the phone holder for car vent can secure your driving safety. Adjustable as your wish: with the 360° rotating and rotating ball joint, the iphone holder for car can be easily adjusted to the best viewing angle.
Qifutan #ad - You can enjoy a more convenient and secure drive. Make your operation more fluently. Secure steady installation: qifutan car mount for iphone 13/12/11 features an extra-strong vacuum suction cup with a layer of super sticky gel, and an anti-shake stabilizer. Note: the car mount need a big enough flat surface to make the adhesive attached closely and completeLY.
Broad vision: qifutan cell phone car mount features a 16cm/6. 2in aluminum long gooseneck that sends your phone much closer to you. Note: only use the extra dashboard pad when the suction cup can not attach on the surface closeLY.
Ideal viewing angle: the car phone mount features a 360° rotating ball joint that allows you to switch it from portrait to landscape view quickly, for getting the best viewing angle. Note: use warm water to wash the car holder's suction cup if the surface is dirty or it can not stick firmly, a locking lever, then let it air dry. Most importantly, you can bend it in every direction to avoid obstructing the view.
SPIDERCASE #ad - The unique ergonomic design makes independent buttons feel sensitive and easy to press, with good touch. Reinforced corner effectively absorb bumps from any angle when dropping. Attached 2 tempered Glass with high touch sensitivity prevent scratch.
Skin-friendly materialmade of the premium frosted material and more comfortable to use. If you have any issues, please feel free to contact us and we will reply you in 24 hrs. Compatiblespidercase compatible with iphone 12 case & iphone 12 pro case 6.
Precision cutouts for easy access to all ports, buttons, sensors and cameras. Solved the problem of leaving fingerprint marks by sweating hands. 2-layer structure provides 360 degree full body rugged protection. What you will get you will get a case for iphone 12/12 pro, 2 pcs Tempered Glass and 6 months warranty.
Upright #ad - Discover what good posture feels like. Healthy upright posture strengthens back and core muscles, stimulates better blood flow and promotes overall well-being. Most of our users notice significant improvement within just 2 weeks of using the UPRIGHT GO 2.
Boost your health: meet upright go 2 the simplest, fastest and most natural way to improve your posture in just 2 weeks. Perfect your posture: you can easily create custom training programs with the UPRIGHT GO 2.
Create lifelong habits: develop a daily practice of posture awareness and correction. Track your progress: tracking mode turns off vibration alerts, and keeps accurate stats on your posture throughout the day using enhanced, multi-sensor technology. Power Source: Battery. You can adjust the sensitivity, training time and vibration intensity in the UPRIGHT App.
HHJ #ad - Thick case and big phone friendly: pulled out the adjustable feet, Google Pixel, SAMSUNG, the car phone holder fits all mainstream smartphones like iPhone, what’s more, it works for phone with thick cases like otter case. Securely stable for most vents: with the extended vent clip, easy to hook the car phone holder on most AC vents by rotating the knob.
Truly durable & perfect protection: the surface of the car mount for iphone is fully protected by silicone, provides securely grip power and protects your costful phone from wear and tear.
The car phone holder mount will stay in place even if you hit a bump or a sharp turn, which ensures a distraction-free road trip. Adjustable as you wish: flexible adjustment makes this cell phone automobile cradle Versatile - Adjustable Bottom Foot to fit for all phones + Release Button behind to offer a more convenience operation + 360° Rotation Ball Joint to turn from portrait to landscape mode as your preference. Sleek phone mount for your beloved car.
Smiling #ad - Perfect fits: precise cutouts for easy access to all Ports, Not Interfere with Microphone Using. The snap-on design of this apple watch case is easy to take on & off without removing the band.
Package included: 2 pack case compatible with apple watch series 7 45mm. The 9h hard tempered glass provides 99. 99% hd clarity while protecting your screen. 12 months warranty for full refund or fREE REPLACEMENT for the defective item.
You will be receiving 2 pack 45mm case with built-in tempered glass screen protector. Compatible model: compatible with apple watch series 7 45mm. Overall protection: made of anti-scratch hard pc and tempered glass, drops, this case covers the full front and curved edges of the watch, offering full protection for your watch against scratches, and bumps.
LISEN #ad - We upgrade the iPhone car holder to meet all the needs of the car vent. Expertholder for air vent, built-in metal and ensure it won't break the air vent and hook, never slip & hook the louver tightly, even bumpy road. Benefit from the thickest threaded anti-skid pad, and falling, sliding, precision gears, grip the phone tightly around even on bumpy roads.
Perfectly compatible with most air vents: the metal hook clip of cell phone mount for car is 50% longer than the ordinary one. Lisen cell phone holder car is born for sturdy & fall: car phone holder mount is designed as “hook shape”, though rotate the knob to attach & PRACTICABILITY, It solves the problem that common clips on the market are easy to Slip & Droop over time.
It can be compatible with 99% horizontal & Vertical vents, Wrangler, which solves the common other holder problems of poor compatibility and is easy to fall on the market. Please note that the length of the clip is adjustable by turning the "wheel" knob. Hold all thick case & big phone steady: car phone holder has the thickest non-slip pad & the 1. 09in clasp length, enough to accommodate 4-7 inch all phone apple iphone 13/ 13 pro max / se / 11 pro max / 13 pro / 12 5g/ 12 pro max / 13 mini / 12 mini / s21 /s20 / xs max / XR / 7 Plus / 6 Plus / samsung Galaxy S22+ /22 ultra / 8 Plus / 6s / xs / S8 Note 8 S7 Edge; Sony; Huawei; Motorola; Nokia, and friendly to thick case.
APPS2Car #ad - The car phone mount holder has a pivoting and telescopic arm that helps you position your phone in the optimum position. Full range of motion: the cradle holder rotates 360°, enabling you to view your device in portrait or landscape orientation. You can pivot the arm up to a 240° arc, and extend the arm from 4. 6" to 6. 3". Easy to place and remove your smartphones with just one hand. Note: clean and dry the mounting surface with the cloth before installation.
Industrial-strength suction cup windshield/dashboard phone holder: paired with APPS2Car's industry leading suction-cup technology, with a coating of sticky gel for seriously secure mounting on your windshield. This product includes an extra 3M sticky dashboard pad for a stronger hold in the case of dash placement.
Broad compatibility: this phone car holder, oneplus 6t 6, lg v35 v30 v20, a9 a8+ a8 a7 pro c8 c7 c5, with its rubber coated grips for enhanced stability and protection, thanks to specialized grips that expand up to 4" wide, Moto G Z X, nokia 8 7 6, Google Pixel 3 3XL, Sony Xperia XA2 XA1 XZ1 Z5 Z4, Note 9 8 6 5, this car phone mount is compatible with iphone 13 12 11 xs max xr x 8 plus 7 6s 6 5s se, Nexus 5 5X 6P, Samsung Galaxy S10 S10+ S10e S9 S9+ S8+ S8 S7 Edge S6 S5, etc. It attaches firmly to the vehicle windshield and stays mounted in hot or cold.
OQTIQ #ad - If you’re looking for a car mount that offers a little something extra, multi-functional car phone holder with an air vent clip and a suction cup that you can mount it on your air vent, the Oqtiq phone holder is an ideal choice. Quick one-button release: just press the release button on the back of the cradle, clamp arms will smoothly slide to release your device, you can easily take off your cellphones.
Compatible with iphone x/ xs/ 8 plus/ 8/ 7 plus/ 7/ 6s plus, samsung note 4/5/6/7/8/9 Google Pixel 2XL, Samsung Galaxy S10/ S10e/ S9/ S8, LG G6 etc.
Broad compatibility: perfect for phones navigation between 2. 1-3. 7 inches. Strong suction cup securely locks on your windshield or dashboard to keep your smartphone safe and sound while you take calls and view navigation instructions. It’s very convenient to adjust the distance between you and the holder. Versatile: the oqtiq car phone holder is an affordable, windshield or dashboard. Perfect flexibility: freely adjust your habitual and comfortable viewing angles due to a 360 degrees rotating ball joint.
1. iOttie
#adSamsung, iOttie Easy One Touch 5 Dashboard & Windshield Universal Car Mount Phone Holder Desk Stand for iPhone, Smartphones, Nokia, Moto, LG, Huawei
#ad5inch and pivots 260 degrees. The mount’s arms will close automatically, holding your device securely while you drive. Wide compatibility: new larger Easy One Touch button, with a universal cradle that fits smartphones and cases of any size.
More information #ad
Mount or remove your phone in seconds with the patented Easy One Touch Mechanism. Easy one touch mechanism: press the locking side arms with a quick one-handed motion, and place your phone against the trigger button. Adjustable bottom foot: You can easily and securely adjust the bottom foot by squeezing the spring button. Magnetic cord organizer: Keep charging cables neatly organized with the magnetic tab located near the bottom foot.
| Brand | iOttie #ad |
| Manufacturer | iOttie #ad |
| Height | 4 Inches |
| Length | 6.5 Inches |
| Weight | 0.45 Pounds |
| Width | 4.2 Inches |
| Part Number | HLCRIO171AM |
| Model | One Touch 5 |
| Warranty | 2 year manufacturer |
More information #ad
2. CINDRO
#adPhone Holder Car Upgrade Clip Never Fall Car Phone Holder Mount Automobile Air Vent Hands Free Cell Phone Holder for Car Fit for All Car Mount for iPhone Android Smartphone
#adIt can hold your phone more tightly than other silicone arm clips, you can rollover your phone at will, it will not move at all. Broad applicability: the ultra-wide adjustable arm design will make the car phone holder suitable for all mobile phones 4.
More information #ad
0-7. 2 inches, thin cases and other devices width between 2. 55-4. 11 inches, such as GPS devices. Note: this phone mount only can hook on horizontal air vent but it cannot be used on vertical or round air vENT. Secure grip & never fall off: the phone mount for car is armed with an innovative hollow silicone rubber. Easy to install: clamp the car vent phone mount on the vent and rotate the handle lock ring. Whenever and wherever, the phone holder for car vent can secure your driving safety. Adjustable as your wish: with the 360° rotating and rotating ball joint, the iphone holder for car can be easily adjusted to the best viewing angle.
| Brand | CINDRO #ad |
| Manufacturer | CINDRO #ad |
More information #ad
3. Qifutan
#adCell Phone Holder for Car Phone Mount Long Arm Dashboard Windshield Car Phone Holder Strong Suction Anti-Shake Stabilizer Phone Car Holder Compatible with All Phone Android Smartphone
#adBroad vision: qifutan cell phone car mount features a 16cm/6. 2in aluminum long gooseneck that sends your phone much closer to you. Note: only use the extra dashboard pad when the suction cup can not attach on the surface closeLY.
More information #ad
It sticks securely and easily on the windshield or most flat surfaces and removes the phone car mount without leaving any nasty marks. One-hand operation: press the button on the lower back of the car mobile phone holder to take out your phone, and press the back edge of the clamping arms to secure your phone with one hand. Ideal viewing angle: the car phone mount features a 360° rotating ball joint that allows you to switch it from portrait to landscape view quickly, for getting the best viewing angle. Note: use warm water to wash the car holder's suction cup if the surface is dirty or it can not stick firmly, a locking lever, then let it air dry. Most importantly, you can bend it in every direction to avoid obstructing the view.
| Brand | Qifutan #ad |
| Manufacturer | Qifutan #ad |
| Part Number | HD-C77 |
| Model | HD-C77 |
More information #ad
4. SPIDERCASE
#adSPIDERCASE for iPhone 12 Case/iPhone 12 Pro Case, 10 FT Military Grade Drop Protection with 2 pcs Tempered Glass Screen Protector Protective Cover for iPhone 12/12 Pro Black
#adSkin-friendly materialmade of the premium frosted material and more comfortable to use. If you have any issues, please feel free to contact us and we will reply you in 24 hrs. Compatiblespidercase compatible with iphone 12 case & iphone 12 pro case 6.
More information #ad
1 inch. Camera & cracks & screen protectionraised lip protects your camera, 2mm raised lip relieves impact and protects your phone screen against drops & surface scratches. Full protectionmilitary drop tested. The iphone 12/12 pro case is made with flexible rubber inner cover and hard polycarbonate back cover, provides good shock proofing and anti-drop protection. Precision cutouts for easy access to all ports, buttons, sensors and cameras. Solved the problem of leaving fingerprint marks by sweating hands. 2-layer structure provides 360 degree full body rugged protection. What you will get you will get a case for iphone 12/12 pro, 2 pcs Tempered Glass and 6 months warranty.
| Brand | SPIDERCASE #ad |
| Manufacturer | SPIDERCASE #ad |
| Part Number | SP-BOX iP12 6.1 |
More information #ad
5. Upright
#adDiscreet and Easy to Use Complete with App and Training Plan Back Health Benefits and Confidence Builder, Upright GO 2 Posture Trainer and Corrector for Back Strapless
#adBoost your health: meet upright go 2 the simplest, fastest and most natural way to improve your posture in just 2 weeks. Perfect your posture: you can easily create custom training programs with the UPRIGHT GO 2.
More information #ad
Stay connected: download the upright go app for ios and Android and sync your device with your phone to start your daily training sessions and tracking your progress. In training mode your device will gently vibrate whenever you slouch. Create lifelong habits: develop a daily practice of posture awareness and correction. Track your progress: tracking mode turns off vibration alerts, and keeps accurate stats on your posture throughout the day using enhanced, multi-sensor technology. Power Source: Battery. You can adjust the sensitivity, training time and vibration intensity in the UPRIGHT App.
| Brand | Upright #ad |
| Manufacturer | Upright #ad |
| Weight | 0.02 Pounds |
| Part Number | URF01W-IN |
| Model | URF01W-IN |
| Warranty | UpRight Technologies Ltd. (hereinafter the “Company“) products are warranted to be free from defects in materials and workmanship under normal use for 1 year from the date of purchase by the original purchaser (“Warranty Period“). |
More information #ad
6. HHJ
#adPhone Mount for Car Super Stable & Easy Upgraded Air Vent Clip Car Phone Holder Mount Fit for All Cell Phone with Thick Case Handsfree Car Mount for iPhone Cell Phone Automobile Cradles Universal
#adTruly durable & perfect protection: the surface of the car mount for iphone is fully protected by silicone, provides securely grip power and protects your costful phone from wear and tear.
More information #ad
Super easy to install: have the phone holder connected to the universal air vent clip, the total installation takes 5s only, that is it! No need to waste your good time to study the complex instruction. The car phone holder mount will stay in place even if you hit a bump or a sharp turn, which ensures a distraction-free road trip. Adjustable as you wish: flexible adjustment makes this cell phone automobile cradle Versatile - Adjustable Bottom Foot to fit for all phones + Release Button behind to offer a more convenience operation + 360° Rotation Ball Joint to turn from portrait to landscape mode as your preference. Sleek phone mount for your beloved car.
| Brand | HHJ #ad |
| Manufacturer | HHJ #ad |
| Part Number | HD-C58-A |
| Model | HD-C58-A |
| Warranty | 2 year |
More information #ad
7. Smiling
#adHard PC Case Ultra-Thin Bumper Overall Protective Cover- Matt Black, Smiling 2 pack Case Built in Tempered Glass Screen Protector Compatible with Apple Watch Series 7 45mm
#adPackage included: 2 pack case compatible with apple watch series 7 45mm. The 9h hard tempered glass provides 99. 99% hd clarity while protecting your screen. 12 months warranty for full refund or fREE REPLACEMENT for the defective item.
More information #ad
Slim & screen protection: this apple watch cover is made of premium PC materials, slim and lightweight, and will not add extra bulk to your watch. You will be receiving 2 pack 45mm case with built-in tempered glass screen protector. Compatible model: compatible with apple watch series 7 45mm. Overall protection: made of anti-scratch hard pc and tempered glass, drops, this case covers the full front and curved edges of the watch, offering full protection for your watch against scratches, and bumps.
| Brand | Smiling #ad |
| Manufacturer | Smiling #ad |
More information #ad
8. LISEN
#adCar Phone Holder Mount, LISEN Universal Cell Phone Holder Car Compatible with iPhone Samsung and More, 2022 Upgrade Sturdy as Rock Solid Phone Holder Mount for Car Air Vent with Solid Metal Hook
#adPerfectly compatible with most air vents: the metal hook clip of cell phone mount for car is 50% longer than the ordinary one. Lisen cell phone holder car is born for sturdy & fall: car phone holder mount is designed as “hook shape”, though rotate the knob to attach & PRACTICABILITY, It solves the problem that common clips on the market are easy to Slip & Droop over time.
More information #ad
Strong clamp arm, and the deepest clasp depth 07 inches, it which completely solves the common problems of cellphone pop up, and springs, shaking, and protects it in all directions safe, Rock Solid Grip : Cell phone car holder that has a most strong clamping force of up to 48 LB equivalent to 70 iPhone 13 pro max on the market. It can be compatible with 99% horizontal & Vertical vents, Wrangler, which solves the common other holder problems of poor compatibility and is easy to fall on the market. Please note that the length of the clip is adjustable by turning the "wheel" knob. Hold all thick case & big phone steady: car phone holder has the thickest non-slip pad & the 1. 09in clasp length, enough to accommodate 4-7 inch all phone apple iphone 13/ 13 pro max / se / 11 pro max / 13 pro / 12 5g/ 12 pro max / 13 mini / 12 mini / s21 /s20 / xs max / XR / 7 Plus / 6 Plus / samsung Galaxy S22+ /22 ultra / 8 Plus / 6s / xs / S8 Note 8 S7 Edge; Sony; Huawei; Motorola; Nokia, and friendly to thick case.
| Brand | LISEN #ad |
| Manufacturer | LISEN #ad |
| Height | 4.09 Inches |
| Length | 4.49 Inches |
| Weight | 0.21 Pounds |
| Width | 3.27 Inches |
| Part Number | H711-Black |
| Model | H711-Black |
| Warranty | Manufacturer warranty for 1 Year from date of purchase |
More information #ad
9. APPS2Car
#adCompatible W/ iPhone, Suction Cup Phone Holder for Windshield/Dashboard/Window, Samsung &Other Cellphone, Universal Dashboard & Windshield Sturdy Suction Cup Car Phone Mount with Strong Sticky Gel Pad
#adIndustrial-strength suction cup windshield/dashboard phone holder: paired with APPS2Car's industry leading suction-cup technology, with a coating of sticky gel for seriously secure mounting on your windshield. This product includes an extra 3M sticky dashboard pad for a stronger hold in the case of dash placement.
More information #ad
Reliable strong suction cup windshield/dashboard phone holder for car: the suction mount Phone Holder has a strong suction cup with Industrial-leading technology that adheres to most smooth surfaces, countertops, desks, tables and other surfaces except leather, such as dashboards, windshields, vinyl and soft surface. Even with case on device. Quick-release button for easy phone access: this hands-free car phone mount with the One-click release button design, then snap device into place, you can just press the button on the back of the holder to release the two sides grips, your phone is good and secure. Broad compatibility: this phone car holder, oneplus 6t 6, lg v35 v30 v20, a9 a8+ a8 a7 pro c8 c7 c5, with its rubber coated grips for enhanced stability and protection, thanks to specialized grips that expand up to 4" wide, Moto G Z X, nokia 8 7 6, Google Pixel 3 3XL, Sony Xperia XA2 XA1 XZ1 Z5 Z4, Note 9 8 6 5, this car phone mount is compatible with iphone 13 12 11 xs max xr x 8 plus 7 6s 6 5s se, Nexus 5 5X 6P, Samsung Galaxy S10 S10+ S10e S9 S9+ S8+ S8 S7 Edge S6 S5, etc. It attaches firmly to the vehicle windshield and stays mounted in hot or cold.
| Brand | APPS2Car #ad |
| Manufacturer | Wiiki-Tech #ad |
| Part Number | H4-S02 |
| Model | H4-S02 |
More information #ad
10. OQTIQ
#adCompatible with iPhone, Oqtiq Dashboard & Windshield Suction Cup Car Phone Mount with Strong Sticky Gel Pad, 3-in-1 Suction Cup Phone Holder Windshield/Dashboard/Air Vent, Samsung & Other Cellphone
#adCompatible with iphone x/ xs/ 8 plus/ 8/ 7 plus/ 7/ 6s plus, samsung note 4/5/6/7/8/9 Google Pixel 2XL, Samsung Galaxy S10/ S10e/ S9/ S8, LG G6 etc.
More information #ad
You can adjust your phone in any angle without blocking your view. Enhanced sticky suction cup: keeping the phone steady while you drive are reusable gel pads that adhere to any flat or curved portion of your dashboard, works well in hot and cold conditions. Broad compatibility: perfect for phones navigation between 2. 1-3. 7 inches. Strong suction cup securely locks on your windshield or dashboard to keep your smartphone safe and sound while you take calls and view navigation instructions. It’s very convenient to adjust the distance between you and the holder. Versatile: the oqtiq car phone holder is an affordable, windshield or dashboard. Perfect flexibility: freely adjust your habitual and comfortable viewing angles due to a 360 degrees rotating ball joint.
| Brand | OQTIQ #ad |
| Manufacturer | OQTIQ #ad |
More information #ad
